FAQ & Glass Glossary
Questions and glass terms, explained simply
Straight answers about sealed glass units in windows and doors — and a plain-language glossary.
Foggy and broken glass
Why is there fog between my window panes?
Fog or moisture between the panes usually means the edge seal of the insulated glass unit has failed. Moist air has got in, the drying material inside the unit can no longer absorb it, and it condenses on the inner glass when the glass is cold. Because it's inside the sealed unit, cleaning won't remove it.
The condensation is on the room side of the glass. Is the unit broken?
Not necessarily. If it wipes off from the room side, it's usually condensation from indoor humidity rather than a failed seal. Condensation on the outside on cool mornings is normal too. If it won't wipe off from either side, the moisture is between the panes and the unit's seal has most likely failed.
One pane is cracked. Can you replace just that pane?
In a double- or triple-pane unit, a cracked pane means the unit's seal is no longer intact, so the usual fix is to replace the whole glass unit. The frame can stay if it's in good condition.
The glass is broken. What should I do first?
Keep people and pets away from the broken glass and don't pull out loose pieces with bare hands. Then send us photos or call — we'll tell you what's needed to replace the unit.
Glass units, windows and doors
Can you replace just the glass instead of the whole window?
Often, yes. If the frame, including the parts that hold the glass, is in good condition, the sealed glass unit can be replaced on its own. If the frame is damaged, a new glass unit alone may not be the right fix.
Do you replace full windows or frames?
No. Northern Glass Works replaces sealed glass units in existing windows and doors. We don't replace full windows or frames.
Do you replace glass in doors?
Yes. We replace sealed glass units in patio and sliding doors, French doors, entry doors and door glass inserts. Add a photo of the door with your request.
How is replacing the glass unit different from replacing the whole window?
A glass unit replacement changes only the sealed unit — the panes and the seal between them — and leaves the frame, trim and wall in place. A full window replacement removes the whole window, frame included. Northern Glass Works does glass unit replacements only. See the comparison →
Will a new glass unit make my window more energy efficient?
A failed unit has lost the sealed space that helps it insulate. A new sealed unit restores that design, but how much it changes your heating or cooling depends on the window, the frame and the house — so we don't promise a specific saving.
Drafts, noise and heat
Will a new glass unit stop drafts?
Only if the glass is the cause. Most drafts come from around the frame, the weatherstripping or the hardware. We'll tell you where the problem is before suggesting a new unit.
Can a new glass unit reduce outside noise?
It can help when the glass is the weak point, but sound also gets in through frames, gaps and vents. Ask whether a unit chosen with sound in mind is available for your window; we don't promise a set noise reduction.
My room gets too hot or bright in the sun. Can different glass help?
Sometimes. When a unit is replaced, ask us whether a different glass option is available for it. Results depend on the glass and the room.
Estimates and contact
Is the estimate free?
Yes. We offer free on-site estimates — a specialist visits, inspects the glass and estimates the cost — and a free quote from your photos. Only the estimate is free; the glass unit replacement itself is quoted in Canadian dollars (CAD).
How much does it cost?
It depends on the size and type of the glass unit and the window or door. Get a free quote or schedule a free on-site estimate and we'll give you a price. Any prices are quoted in Canadian dollars (CAD).
What should I include in my request?
A short description of the problem, whether it's a window or a door, your town, and — if you can — a photo of the whole window or door plus a close-up of the glass.
If I pick a date and time, is my appointment booked?
No. A preferred date or time is a request. Northern Glass Works will contact you to confirm an appointment.
Which areas do you serve?
Barrie and Simcoe County, Muskoka, York Region, the GTA and nearby towns. See the full list of service areas →
Send photos for a free quote, or book a free on-site estimate.
The estimate is free. The glass unit replacement itself is quoted in Canadian dollars (CAD).
Glass Glossary
Common terms you may hear when talking about window and door glass. These are general definitions, not a list of NGW products.
- Insulated glass unit (IGU)
- Two or three panes of glass held apart by a spacer and sealed around the edges into one unit. Also called a sealed unit.
- Sealed unit / thermopane
- Everyday names for an insulated glass unit. “Thermopane” started as a brand name and is now used for the whole category.
- Double-pane / triple-pane
- An insulated glass unit with two or three panes of glass.
- Seal failure
- When the edge seal of a unit stops keeping moist air out. Once the desiccant is saturated, the usual sign is fog or moisture between the panes.
- Spacer
- The strip around the edge of the unit that keeps the panes apart at a set distance.
- Edge seal
- The sealing around the edge of a unit that keeps moist air out. Many units have an inner (primary) and an outer (secondary) seal; depending on the unit they are made of butyl, silicone, polysulphide or polyurethane. With age the materials lose elasticity and can crack.
- Desiccant
- A drying material inside the spacer that absorbs moisture in the sealed space. Once it is saturated, moisture condenses between the panes when the glass is cold.
- Gas fill (argon)
- Some units are filled with an inert gas such as argon instead of air, which slows heat transfer through the glass. When a seal fails, the gas can slowly escape; the fog itself comes from moisture getting in.
- Low-E coating
- A very thin, nearly invisible coating on the glass that reflects heat. “Low-E” means low emissivity.
- Tempered glass
- Safety glass that is heat-treated so it breaks into small, blunt pieces instead of sharp shards. Commonly used in doors.
- Laminated glass
- Two layers of glass bonded to a plastic interlayer that holds the glass together if it breaks.
- Frame
- The outer part of a window or door that is attached to the wall opening, together with the parts that hold the glass. In opening windows, the part that holds the glass moves.
- Glazing bead (stop)
- The strip that holds the glass unit in place in the window or door. It is removed to take out the old unit.
- Condensation
- Water that forms when moist air touches a cold surface. On the room side of the glass it is usually about humidity; between the panes it points to seal failure.